DL320e G8 b120i RAID Controller. Migrate RAID-0 one HD to RAID-1 two HD without loosing data (561 Views)
Reply
Occasional Visitor
oriol_sanchez
Posts: 1
Registered: ‎11-27-2013
Message 1 of 3 (561 Views)

DL320e G8 b120i RAID Controller. Migrate RAID-0 one HD to RAID-1 two HD without loosing data

Hi,

 

Just installed new DL320 g8. We have only one HD and we're in a hurry, so proceed installing WIndows 2012 R2, hiper-V.

Spent 3 days working.

 

Now we've the second disk.

 

Dos anyone knows if it's possible to migrate RAID-0 to Raid-1 without loosing data.

 

How?

 

Thanks,

Occasional Visitor
taitadam
Posts: 1
Registered: ‎12-24-2013
Message 2 of 3 (481 Views)

Re: DL320e G8 b120i RAID Controller. Migrate RAID-0 one HD to RAID-1 two HD without loosing data

Did you find a solution to this? I am in exactly the same position.

 

Thanks

Adam

Advisor
sfora
Posts: 25
Registered: ‎07-10-2013
Message 3 of 3 (475 Views)

Re: DL320e G8 b120i RAID Controller. Migrate RAID-0 one HD to RAID-1 two HD without loosing data

I don't know if it is possible in that very basic controller.

 

If it is possible, I think you will need write cache and a battery and it should be done in the Array Configuration utility

 

Here is the manual:

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c00729544/c00729544.pdf

 

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.