DL140 G3 Software/Firmware/Driver Update issue (1116 Views)
Reply
Occasional Visitor
Jeff_nz
Posts: 4
Registered: ‎10-01-2008
Message 1 of 7 (1,116 Views)

DL140 G3 Software/Firmware/Driver Update issue

I have a ProLiant DL140 G3 running windows server 2003 SP2 x86, when I go and download any of the HP drivers/firmware/software from HP for this model and attempt to install I get the following in the install window:

The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system.

Strange! The server is definetly DL140G3 and also says so when I run 'System Information' in Windows. Not sure why I can't update.

Thanks in advance for your assistance.

~Jeff
Please use plain text.
Honored Contributor
Steven Clementi
Posts: 4,430
Registered: ‎07-28-2004
Message 2 of 7 (1,116 Views)

Re: DL140 G3 Software/Firmware/Driver Update issue

Jeff:

Have you tried the Firmware Maintenance CD?

and/or the latest Proliant Support Pack?


Steven
Steven Clementi
HP Master ASE, Storage and Clustering
MCSE (NT 4.0, W2K, W2K3)
VCP (ESX2, Vi3, vSphere4, vSphere5)
RHCE
Please use plain text.
Occasional Visitor
Jeff_nz
Posts: 4
Registered: ‎10-01-2008
Message 3 of 7 (1,116 Views)

Re: DL140 G3 Software/Firmware/Driver Update issue

I considered it, but then noticed that the PSP and the Firmware cd are not made for this model (not on the downloads page). Will it be ok to run these cds on the server still despite this?
Please use plain text.
Honored Contributor
KarloChacon
Posts: 4,376
Registered: ‎04-08-2007
Message 4 of 7 (1,116 Views)

Re: DL140 G3 Software/Firmware/Driver Update issue

hi

which drivers are you trying to install?? there a lot of them
anyway have you tried?


HP ProLiant DL140 G3 Software Support CD

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?swItem=MTX-531640bd8b264293...〈=en&cc=us&mode=5&

also this is the link for the NIC's driver

http://www.broadcom.com/support/ethernet_nic/netxtreme_server.php

regards
Didn't your momma teach you to say thanks!
Please use plain text.
Occasional Visitor
Jeff_nz
Posts: 4
Registered: ‎10-01-2008
Message 5 of 7 (1,116 Views)

Re: DL140 G3 Software/Firmware/Driver Update issue

I ran the firmware cd this weekend as well as the PSP pack and updated anything it detected that was superseded on the cd. I have tried the latest versions of the drivers/firmware/software such as : HP NC-Series Broadcom 1Gb Driver for Windows Server 2003 ; HP Network Configuration Utility for Windows Server 2003; HP Embedded SATA RAID Controller Driver for Windows 2000/Windows Server 2003; HP NC-Series Broadcom Online Firmware Upgrade Utility for Windows Server 2003/2008 etc
Please use plain text.
Frequent Advisor
Srinivas Suddapalli
Posts: 57
Registered: ‎10-06-2008
Message 6 of 7 (1,116 Views)

Re: DL140 G3 Software/Firmware/Driver Update issue

Hi Jeff,

The software support disk would contain all relevant software for the server.

The link for the ISO image is
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15...

Thanks
Please use plain text.
Occasional Visitor
Laraya
Posts: 1
Registered: ‎01-29-2012
Message 7 of 7 (1,106 Views)

Re: DL140 G3 Software/Firmware/Driver Update issue

hi all,

 

we have a Windows Server 2008 R2 x64 Ent. running on Hp DL 140 G3 server. is there a new Firmware and PSP for this type of server?

 

as per checking to the link below it only support up to windows 2003 server and this is an old firmware version (6 Feb. 2007)

 

http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=15...

 

Many thanks,

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation