11-23-2013 03:53 AM
i have a server proliant ml350 g6 with hp array 410i.
the smh reports an error with the firmware of my harddisk.
disk1: HP EF0600FARNA Firmware: HPD2
disk2: HP EF0600FATFF Firmware: HPD2
When I try this firmware:
RECOMMENDED * Online ROM Flash Component for Windows - EF0300FARMU, EF0450FARMV, EF0600FARNA drives
The software will not be installed on this system because the required hardware is not present in the system or the software/firmware doesn't apply to this system.
There were no devices found that could be loaded with the ROM Image.
What can I do, because I thing that this is the correct software?
is the problem from the fact, that i have two different types of harddisk?
11-24-2013 12:35 PM
does the P410i Smart Array Controller has a cache module installed? Online HDD firmware upgrade is only supported if a
cache module is present. What's the current firmware version on the P410i?
Best regards, Joern.
12-12-2013 08:17 AM - edited 12-12-2013 08:20 AM
great, the problem is no cache modul is installed.
how can I do an offline update?
12-12-2013 08:21 AM - edited 12-12-2013 08:24 AM
If you boot the server, you will see the smart array message during POST. If in this line is something like (256MB - see example; 1GB cache module) this is the indicator for the cache module. You can see this also from ACU.
For an offline update just boot the SPP - www.hp.com/go/spp
Hope this helps!
There are only 10 types of people in the world -
those who understand binary, and those who don't.
No support by private messages. Please ask the forum!
If you feel this was helpful please click the KUDOS! thumb below!