Boot Logical Drive is Configured but is missing or Offline (9699 Views)
Reply
Occasional Visitor
Colin CDUB White
Posts: 2
Registered: ‎03-15-2011
Message 1 of 16 (9,699 Views)

Boot Logical Drive is Configured but is missing or Offline

I'm trying to install 2008 r2 standard on a DL 180 g6.

Post initialization; The P410 controller shows "Boot Logical Drive is Configured but is missing or Offline" and I unable to install the OS on any array or Drive.

Please Help.
Please use plain text.
Respected Contributor
Michael A. McKenney
Posts: 818
Registered: ‎06-08-2009
Message 2 of 16 (9,651 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

Boot the server. Go into the controller at post and see what the issue is. Did you install the correct drivers starting 2008 R2 to see the controlelr. Does you server fully support 2008 R2? Do you have the latest firmware?
Please use plain text.
Occasional Visitor
Colin CDUB White
Posts: 2
Registered: ‎03-15-2011
Message 3 of 16 (9,651 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

Thx for the reply Michael. to answer your questions.

issue at post is "Boot Logical Drive is Configured but is missing or Offline" Diagnostics yield nothing useful to me or HP support.

Server is Brand spanking new DL180 G6 it had better support 2008 r2...

Firmware attempts
v3.52 on the p410 = no joy
v2.50 on the p410 = no joy
v3.66b on the p410 = no joy

Anguished cries for help.
12+ hours working with HP support = absolutely no joy, nothing but circles, poor solutions and grief.

Own initiative with a bit of Luck.
New p410 card w v1.66 = happiness.

It's either an issue with the newer firmware or just a bunk card, everything else worked on the card just wouldn't boot. HP support has no idea why it didn't work.

Case closed.
Please use plain text.
Occasional Visitor
TanzaniaXP
Posts: 1
Registered: ‎07-04-2012
Message 4 of 16 (9,166 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

I was stuck with the same error for three days on HP Proliant DL380 G5, I feel that this solution might work for most of HP servers.  

 

Please, take few steps to deal with this..

 

1- Press F10 and select option 3; Diagnostic Utility

      Then select; Boot Disk Test

~~~If the results is Boot disk status-fail

                                   Boot disk Ready-Fail

  Verify Boot Sector; Fail

 

***You have a HD, OS installed, but why fail????  Boot disk is not selected on the BIOS !!!


Then follow me on the next step, but if all pass, the next step will not work for you !!

 

2-Restart the computer and wait till you see; "Press F8 to run option ROM configuration for Array utility"

 

3-Press F8, you will see the Main Menu, Select the last option "Select Boot Volume"

~~~~~ Most of the time, it will be on Direct attached storage, on the first logicar drive 01

 

save settings and restart your server !!

 

_______________you will be smiling again !!___________________________________________

Please use plain text.
Occasional Visitor
kingbeard
Posts: 1
Registered: ‎10-23-2012
Message 5 of 16 (8,654 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

Hi,

 

I have exactly this problem on my DL380, ie.  it wont boot from disk.

 

The problem is that the p400 driver/firmware (7.24) does NOT have the boot option in the menu.

 

It simply has three entries Creat, View, Delete Logical drives. The fourth entry where you can set the boot drive is missing!!

 

Any ideas?

 

I thought about downgrading the firmware, but need a working system to load the driver.

 

Cheers,

 

Mark

Please use plain text.
Occasional Visitor
Wahll
Posts: 1
Registered: ‎11-17-2012
Message 6 of 16 (8,494 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

Hi Mark

You can use the Offlive Array Configuration Utility (ISO) to configure boot drive in p400/p400i array controller.

regards,

László
Please use plain text.
HP Pro
Sirajul_Haque
Posts: 12
Registered: ‎06-14-2012
Message 7 of 16 (8,266 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

Hi,

 

if you wish to have more information about this rror, you may check the below said link

 

Solved: “Boot Logical Drive is configured but is Missing or Offline” on HP Proliant Server

 

This may help you

 

cheers

I am an HP Employee

Was this post useful? - You may click the KUDOS! star to say thank you.
Please use plain text.
Frequent Advisor
zeroagemain
Posts: 62
Registered: ‎06-11-2009
Message 8 of 16 (7,668 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

Thanks.

The solution in the link posted above worked for us.
Please use plain text.
Occasional Visitor
50chickens
Posts: 1
Registered: ‎10-25-2013
Message 9 of 16 (5,302 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

None of these things worked for me. i had been moving drives around on my server when i started receiving this message and then my G5/P400i would not boot into any OS.

i ran the smart storage administrator diagnostics and found the Primary Boot Lun was set to ' (as in, a single quote). The only way i found was in the command line version of acu to reset the boot volume.

controller slot=0 ld modify bootvolume=none

After i did this the error went away and my server was able to boot again.
Please use plain text.
Occasional Visitor
moored99
Posts: 4
Registered: ‎02-14-2009
Message 10 of 16 (5,051 Views)

Re: Boot Logical Drive is Configured but is missing or Offline


50chickens wrote:
None of these things worked for me. i had been moving drives around on my server when i started receiving this message and then my G5/P400i would not boot into any OS.

i ran the smart storage administrator diagnostics and found the Primary Boot Lun was set to ' (as in, a single quote). The only way i found was in the command line version of acu to reset the boot volume.

controller slot=0 ld modify bootvolume=none

After i did this the error went away and my server was able to boot again.

I to ran the off line ACU and this fixed my problem look for hpacuoffline-9.40-12.0-x86.zip (102 MB) (2013 version) in google this file contains an ISO burn to disk.

Please use plain text.
Occasional Visitor
DeVisdude
Posts: 1
Registered: ‎12-08-2013
Message 11 of 16 (4,556 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

It worked for me too, except the sentence was a bit different for me: controller slot=1 logicaldrive 1 modify bootvolume=none
Please use plain text.
Occasional Advisor
HOSSEIN TAVAKOLI
Posts: 13
Registered: ‎07-03-2008
Message 12 of 16 (4,220 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

 I Did it and its working Now :-)

 

below is the Steps:

 

1:start the computer and wait till you see; "Press F8 to run option ROM configuration for Array utility"

 

2-Press F8, you will see the Main Menu, Select the last option "Select Boot Volume"

 

3:Select in  Direct attached storage,

 

4:if you see first logicar drive 01 select it .

5:Press F8 To save Logical Drive 01 as Boot Volume.

 

6:Press F8 to Exit and start with New Boot Volum.

 

Good Luck!

 

 

 

Please use plain text.
Trusted Contributor
rianui
Posts: 179
Registered: ‎08-01-2006
Message 13 of 16 (3,718 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

Hossein, you are the best!

You saved me hours of trouble :-)

Please use plain text.
Occasional Advisor
A.Maksimov
Posts: 10
Registered: ‎12-02-2010
Message 14 of 16 (3,467 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

Try HP Offline Smart Storage Administrator and "Set Bottable Logical Drive/Volume" option

HP Smart Array P400i — Boot Logical Drive is configured but is Missing or Offline

Please use plain text.
Occasional Visitor
BG1017
Posts: 1
Registered: ‎05-28-2014
Message 15 of 16 (2,063 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

This works.  Thank  you for the helpful information.  I am trying to get things done before vacation.

You made my life easier this week!

Please use plain text.
Occasional Visitor
KevinK
Posts: 1
Registered: ‎07-06-2011
Message 16 of 16 (1,354 Views)

Re: Boot Logical Drive is Configured but is missing or Offline

Thank you Hossein.  After motherboard replacement, I had the "Boot Logical Drive is Configured but is missing or Offline" error and your steps resolved the issue.  Server can boot the OS now!

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation