Stack IRF or XRN (577 Views)
Reply
Frequent Advisor
Inge_Suzzy
Posts: 46
Registered: ‎03-11-2011
Message 1 of 4 (577 Views)

Stack IRF or XRN

I have 2 switches connected trough 10 giga link, how can i configure the redundancy?

i know that it's calles IRF or XRN but i don't have a paper that tells how to make it work.

 

 

____________________________________
Ing. Angélica Susana Hernández Vázquez
System and Field Engineer
Please use plain text.
Honored Contributor
Fredrik Lönnman
Posts: 599
Registered: ‎11-26-2010
Message 2 of 4 (572 Views)

Re: Stack IRF or XRN

Models?

---
CCIE Service Provider
MASE Network Infrastructure [2011]
H3CSE
CCNP R&S

Please use plain text.
Frequent Advisor
Inge_Suzzy
Posts: 46
Registered: ‎03-11-2011
Message 3 of 4 (568 Views)

Re: Stack IRF or XRN

a pair of 4800G and other pair of  5500G-EI

____________________________________
Ing. Angélica Susana Hernández Vázquez
System and Field Engineer
Please use plain text.
Advisor
anagamine
Posts: 13
Registered: ‎05-28-2009
Message 4 of 4 (376 Views)

Re: Stack IRF or XRN

Hi Inge_Suzzy,

 

For 4800G you can follow the examples in the link below (From page  1138 to 1156).

http://bizsupport1.austin.hp.com/bc/docs/support/SupportManual/c02586068/c02586068.pdf

ps: although the model of this guide is different the way to configure irf is the same.

 

For 5500G, it is necessary just to link the the rear ports of the switch and reboot all.

 

 

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation