Procurve 8212zl - Cisco equipment (223 Views)
Reply
Occasional Collector
jonare
Posts: 2
Registered: ‎10-30-2013
Message 1 of 3 (223 Views)

Procurve 8212zl - Cisco equipment

Hello

 

When connecting Cisco equipment to my 8212zl (also other procurves) Im always getting TX drops. Especially it happes to Cisco routers. I have tried to set both the 8212zl and the Ciscos on static 1000FDX or 100FDX, but still im getting drops.

 

What can I do to prevent this ?, the Cisco community blames the procurve (no suprise).

 

Thanx

J.

Jon Are Endrerud
Please use plain text.
Trusted Contributor
Vince_Whirlwind
Posts: 401
Registered: ‎02-25-2013
Message 2 of 3 (203 Views)

Re: Procurve 8212zl - Cisco equipment

You should use auto/auto, especially if you want 1Gb connectivity.

Please use plain text.
Occasional Collector
jonare
Posts: 2
Registered: ‎10-30-2013
Message 3 of 3 (196 Views)

Re: Procurve 8212zl - Cisco equipment

Auto/auto is what im always using, Im aware that this is the best practice. Yet the procurves drops more packets with auto/auto, than with 1000FDX static.

 

This is only happning with Cisco devices, and only with wired RJ45, not with fiber modules.

Jon Are Endrerud
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation