Re: Need help with setting up inter-VLAN routing on HP 2920 switches (1064 Views)
Reply
Occasional Collector
MabeyHire
Posts: 3
Registered: ‎10-09-2013
Message 1 of 2 (1,076 Views)

Need help with setting up inter-VLAN routing on HP 2920 switches

Hi all,

 

I have a stack of 4 x HP 2920-24 switches that are connected using the HP stacking modules.

 

I now see 96 ports on my stack plus the ports on the 10GB modules in the back of each switch.

 

I have untagged all of the odd numbered ports and assigned them to VLAN25 and assigned ip 192.168.25.242 to the VLAN.

 

I have also tagged all of the even numbered ports and assigned them to VLAN30 and then assigned ip 192.168.30.242 to that VLAN.

 

I now want to set up routing between the two VLANs but cannot for the life of me work out how.

 

Originally I had tagged ALL of the ports but found I could not connect to the web interface of the stack using the 192.168.25.242 url.  This is why I have now untagged them.

 

Could someone please advise me on what I need to do here?  There appears to be very little in the way of documentation available for this feature.

 

Many thanks.

Trusted Contributor
Vince_Whirlwind
Posts: 401
Registered: ‎02-25-2013
Message 2 of 2 (1,064 Views)

Re: Need help with setting up inter-VLAN routing on HP 2920 switches

What is the prupose of the VLANs?

 

Why are some ports "untagged" and some ports "tagged"?

 

Have you issued the "ip routing" command?

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.