HP Procurve 2920 - VLANs number (568 Views)
Reply
Occasional Contributor
Yobaaa
Posts: 7
Registered: ‎05-23-2013
Message 1 of 4 (568 Views)

HP Procurve 2920 - VLANs number

Hello, we are bought switch hp procurve 2920 and i not found the answer to the question( http://h20565.www2.hp.com/portal/site/hpsc/public/psi/manualsResults/?sp4ts.oid=5354494 ): How much VLANs his can support when routing mode is on?

 

Where can I find a document containing this information?

Thanks in advance.

Occasional Visitor
freddufour
Posts: 2
Registered: ‎12-26-2013
Message 2 of 4 (549 Views)

Re: HP Procurve 2920 - VLANs number

Occasional Contributor
Yobaaa
Posts: 7
Registered: ‎05-23-2013
Message 3 of 4 (493 Views)

Re: HP Procurve 2920 - VLANs number

Okay, if I assume command max-vlan 20 and configure 20 Vlans and assigned ip adresses for  each Vlan-interface, 

wakes it work inter vlan routing between them?

Advisor
Neil_Salmon
Posts: 12
Registered: ‎11-27-2012
Message 4 of 4 (453 Views)

Re: HP Procurve 2920 - VLANs number

In order to get inter-VLAN routing working requires the following:-

1. Enable routing - ip routing


2. Create VLANs and assign interfaces to the VLANs.

3. Assign ip address within the VLAN context: ip address 10.10.10.1/24 etc

 

 

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.