Re: HP E2610-24 (J9085A) configuration (708 Views)
Reply
Collector
dominik92
Posts: 1
Registered: ‎07-06-2011
Message 1 of 2 (744 Views)

HP E2610-24 (J9085A) configuration

[ Edited ]

Hello!

How I can configure HP ProCurve E2610-24 (J9085A) in this network: (click to view real photo)

Esteemed Contributor
paulgear
Posts: 655
Registered: ‎04-03-2011
Message 2 of 2 (708 Views)

Re: HP E2610-24 (J9085A) configuration

Obviously, you'll need to turn on IP routing on the switch ("ip routing").  You'll need a VLAN for each server, and an IP address for each VLAN ("vlan XX; ip address 217.48.10.1/30; exit").  Then you'll need to add a static route for 80.48.20.0/24 via the server address (presumably 217.48.10.2/30) on 217.48.10.0/30 ("ip route 80.48.20.0/24 217.48.10.2"), and one for 80.48.21.0/24 via 217.48.10.4/30 and so on for the rest of the links.  (See the manuals for exact syntax on the commands in brackets.)

 

Try to make your VLAN numbering scheme somehow match your subnets, for easy remembering.  e.g. You might use VLAN 21 for 80.48.21.0/24 and VLAN 24 for 80.48.24.0/24.

Regards,
Paul
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.