configure EPSON FX-2190 on HP3000 spooler (319 Views)
Reply
Occasional Visitor
Yoann77
Posts: 2
Registered: ‎10-07-2013
Message 1 of 3 (319 Views)

configure EPSON FX-2190 on HP3000 spooler

Hi to all !

 

I need your help to install a dot matrix printer on HP3000.
 in npconfig file, I entered the IP address and the printer works fine but it does not print the full width of the sheet (i use 11"x380mm continu paper and printer print only on A4 format )

below the npconfig file of my system:

 

32 (NETWORK_ADDRESS = 172.16.100.230

TCP_PORT_NUMBER=9100

PJL_SUPPORTED=TRUE

SNMP_ENABLED=FALSE

SETUP_FILE = IMPDEVIS.HPENV.SYS)

 

i think my problem is in IMPDEVIS.HPENV.SYS but i don't know how edit this file...

 

thanks for your help !

 

Please use plain text.
Occasional Visitor
Guffadi
Posts: 1
Registered: ‎10-29-2013
Message 2 of 3 (279 Views)

Re: configure EPSON FX-2190 on HP3000 spooler

Hi Yoann77,

 

What version of OS you are using?

 

If you think that the IMPDEVIS.HPENV.SYS is issue try editing the NPCONFIG as below and print.

 

32 (NETWORK_ADDRESS = 172.16.100.230

TCP_PORT_NUMBER = 9100
 BANNER_HEADER   = TRUE
 BANNER_TRAILER  = FALSE
 JAM_RECOVERY    = TRUE
 POLL_INTERVAL   = 10
 POLL_INTERVAL_MAX = 100
 snmp_GET_COMMUNITY_NAME = ALL
 pjl_supported   = TRUE
 snmp_enabled =    FALSE)

 

While editing the NPCONFIG make sure you are logged on as MANAGER.SYS.

 

Cheers!!

Please use plain text.
Occasional Visitor
Yoann77
Posts: 2
Registered: ‎10-07-2013
Message 3 of 3 (242 Views)

Re: configure EPSON FX-2190 on HP3000 spooler

Hi Guffadi !

 

Thanks a lot for your answer, i'll try your solution as soon as possible, sorry i'm coming back vacation that's why i've not answered before...

i'll give you quickly a return...

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation