Problem printing to Lanier (Ricoh) Print Device (81 Views)
Reply
Occasional Contributor
Peter Berry
Posts: 4
Registered: ‎07-30-2001
Message 1 of 3 (81 Views)

Problem printing to Lanier (Ricoh) Print Device

I have been experiencing problems whilst printing large files to a Lanier (formerly Ricoh) print device on the network. It appears the PJL is slightly different to that of the HP print devices, and, as a result, majority of large files are reprinted.

Has anyone else experienced similar problems, and, if so, is there a way around it??

Thanks,

Pete.
Please use plain text.
Valued Contributor
Tom Wittenberg_1
Posts: 32
Registered: ‎06-29-2000
Message 2 of 3 (81 Views)

Re: Problem printing to Lanier (Ricoh) Print Device

You could try to disable PJL with PJL_SUPPORTED=FALSE as part of your definition of the printer in npconfig file.

Saving Buyers and Sellers money
Please use plain text.
Occasional Visitor
John B Mooney
Posts: 1
Registered: ‎06-08-2003
Message 3 of 3 (81 Views)

Re: Problem printing to Lanier (Ricoh) Print Device

Just wanted to see if you ever had any luck with getting the Ricoh to print.
I'm in a similar situation with a Ricoh 4510 printer, running MPE/IX version 7.5

I've just started to look into 3rd party additional software, but there's got to be an easier solution.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation