how to configure HP Laserjet 2035n ip address? (3498 Views)
Reply
Occasional Visitor
poren
Posts: 1
Registered: ‎08-15-2012
Message 1 of 2 (3,498 Views)

how to configure HP Laserjet 2035n ip address?

Anyone knows steps to configure P2035n ip address to static ip address like 10.1.1.101?

Please use plain text.
HP Pro
AuntieEm
Posts: 30
Registered: ‎04-21-2011
Message 2 of 2 (3,491 Views)

Re: how to configure HP Laserjet 2035n ip address?

Open your Embedded Web Server (EWS) by entering the IP address of the printer and follow the below steps to configure a static IP address:
  1. Click the Networking tab.
  2. Click Network Settings under Configuration in the left menu bar.
  3. Click the TCP/IP or IPv4 tab. (depends on the printer model as to what appears in your EWS)
  4. Use the drop-down menu or the radial button to change the IP Configuration Method to Manual.(depends on the printer model as to what appears in your EWS)
  5. Type the new IP Address in the box to change the IP Address .
  6. Change any other applicable networking information, if applicable.
  7. Scroll down the page and click Apply .
  8. Click OK on the confirmation screen and then close the browser window.
  9. Wait a few minutes and then print the Self Test/Configuration page verify that the IP Address has changed.
    Make sure you also change the IP address in your printer properties settings.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

I am an HP employee.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation