error code 79.00 fe in laserjet 4000 (1678 Views)
Reply
Occasional Contributor
Saeed Akrami
Posts: 3
Registered: ‎04-30-2007
Message 1 of 2 (1,678 Views)

error code 79.00 fe in laserjet 4000

ihave error 79.00 fe in laser jet 4000
the printer dont work at all whwn turn on the printer this error apaear
Honored Contributor
Mark Froggatt
Posts: 1,741
Registered: ‎07-25-2006
Message 2 of 2 (1,678 Views)

Re: error code 79.00 fe in laserjet 4000

Saeed

1. Turn the printer off, and
then turn the printer on.
2. Try printing a job from a
different software
application. If the job
prints, go back to the first
application and try printing
a different file. (If the
message only appears
with a certain software
application or print job,
have the customer contact
the software vendor for
assistance.)
If the message persists,
try the following:
1. Cycle power.
2. Reseat or replace the
interface cable and cycle
power.
3. Remove the DIMMs
one at a time and cycle
power.
4. Try using the parallel
interface, if possible.
5. With the EIO cards
removed from the printer,
perform a cold reset.
6. If the error persists,
replace the Formatter.

Mark
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.