New P1606 toner light on (1900 Views)
Reply
Occasional Visitor
Cormac Foster
Posts: 3
Registered: ‎05-17-2010
Message 1 of 4 (1,900 Views)

New P1606 toner light on

I just set up a brand new P1606dn and inserted the starter toner cartridge (after removing the appropriate tape). The install went fine, but the toner light is blinking. I've restarted, cycled the power, pulled, shaken, and reinserted the cartridge several times, and everything else I can think of. Any ideas? Thanks!
Occasional Visitor
Cormac Foster
Posts: 3
Registered: ‎05-17-2010
Message 2 of 4 (1,900 Views)

Re: New P1606 toner light on

I should have stated that the light is actually blinking, indicating that the cartridge isn't registering with the printer (bottom of http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01983557&tmp_task=solveCategory&lc=en&dlc=en&cc...〈=en&product=4110410 ).
Occasional Visitor
Cormac Foster
Posts: 3
Registered: ‎05-17-2010
Message 3 of 4 (1,900 Views)

Re: New P1606 toner light on

Fixed on the 9th try. :)
Occasional Visitor
lawrencesg
Posts: 1
Registered: ‎01-17-2011
Message 4 of 4 (738 Views)

Re: New P1606 toner light on

How did you fix the problem? I have the exact same issue. I tried changing cartridges, but light is still blinking. I have had the printer for around seven months; it is used sparingly. I could not access the link you posted; perhaps you could indicate a key word or two.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.