Laserjet 1300 paper delivery sensor (509 Views)
Reply
Occasional Contributor
Dave olsen
Posts: 5
Registered: ‎01-27-2009
Message 1 of 4 (509 Views)

Laserjet 1300 paper delivery sensor

When disassembling my 1300 printer, I took off more than necessary and am now having trouble with the paper sensor directly above the fuser. HP calls it PS921. Can anyone tell me how the spring attaches. Beside being all thumbs, I just can't see where to attach it. Does anyone have a drawing or picture showing the sensor correctly assembled?

Any help will be appreciated,
Thanks
Dave
Honored Contributor
razzer
Posts: 6,734
Registered: ‎03-04-2007
Message 2 of 4 (509 Views)

Re: Laserjet 1300 paper delivery sensor

i can't quite remember exactly,though it should be inside behind the flag where the flag will move when paper passes then snap back into place.i think it goes over the back right sensor flag post (facing the back of the machine),then against the frame.the flat part of the flag should sit in between the "U" shaped photosensor part so when paper passes it moves it out away from the U part ,then it snaps back into the U part.not sure if any of these pics will help.but they might.
Honored Contributor
razzer
Posts: 6,734
Registered: ‎03-04-2007
Message 3 of 4 (509 Views)

Re: Laserjet 1300 paper delivery sensor

or this pic.
Honored Contributor
razzer
Posts: 6,734
Registered: ‎03-04-2007
Message 4 of 4 (509 Views)

Re: Laserjet 1300 paper delivery sensor

or possibly this pic.zoom in .
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.