02-10-2012 09:28 AM
Web document describes the error as such. Make sure you are plugged into a reliable power source.
The low-voltage power supply is defective.
Turn the product off, and then on.
Check the connector (J143) on the DC controller PCA.
If the error persists, replace the low-voltage power supply.
If it is brand new then get it replaced. Call HP for warranty assistance if you have not already.
04-18-2012 01:17 PM
Please check if your printer is 110V or 220V. We have seen customer plugging 220V units to 110V and getting message. If that is the case and the unit is new, please return the unit to your vendor.
If the issue is not resolved I highly recommend you to call HP tech support.
Please mark the post that solves your problem as Accepted Solution
(Although I am employed by HP, I am speaking for myself and not for HP)
10-16-2012 05:15 AM
I encountered same error (58.00.04) on my laserjet 600 M603 printer. I changed the low voltage power supply and DC controller but the error remained. I then decided to change the Formatter board as a last resort before losing hope on the printer and that fortunately cleared the error and the printer works fine now