How to reset 1320n ip adress!? (31033 Views)
Reply
Occasional Visitor
Posts: 3
Registered: ‎06-18-2006
Message 1 of 10 (31,033 Views)

How to reset 1320n ip adress!?

How to hard reset 1320n ip adress?


Thank in advance.
Honored Contributor
Posts: 3,131
Registered: ‎02-09-2004
Message 2 of 10 (31,033 Views)

Re: How to reset 1320n ip adress!?

Hello Kirill,
If you mean change the IP address, just open up a web browser and type the old address to access the HP printer utility. Jerry
Go Ahead, There's Always Bankruptcy Later
Occasional Visitor
Posts: 3
Registered: ‎06-18-2006
Message 3 of 10 (31,033 Views)

Re: How to reset 1320n ip adress!?

I can't open printer's ip in browser!

I want to restore factory defaults. After that printer must recive new ip adress by DHCP.

How i can do that?




p.s. sorry for my russian english.
Occasional Visitor
Posts: 1
Registered: ‎06-19-2006
Message 4 of 10 (31,033 Views)

Re: How to reset 1320n ip adress!?

My guess is you don't know the original IP of the printer. To find this plug your printer into your network and press the small round black button on the rear end of the 1320. This will print out a configuarion page. Find the current IP on those sheets and type that address into a web browser. I hope this helps you!
Respected Contributor
Posts: 453
Registered: ‎11-30-2005
Message 5 of 10 (31,033 Views)

Re: How to reset 1320n ip adress!?

To reset the internal JetDirect of your LaserJet 1320n:

- Turn off the printer

- Push and mantain pushed the button on the back of the printer (near to USB connector) for 30 seconds.

- Release the button

- With 1 to 3 minutes for DHCP Server (if you have one)

The printer now have a default configuration, if you have a DHCP server your printer now have a IP Address of your DHCP Server's IP pool.

- Print a coniguration page holding down the green button until the attention LED is blinking

- Release it, 3 pages will be printed.

It is done

Respected Contributor
Posts: 453
Registered: ‎11-30-2005
Message 6 of 10 (31,033 Views)

Re: How to reset 1320n ip adress!?

Excuse me. I forgot one step.

To reset the internal JetDirect of your LaserJet 1320n:

- Turn off the printer

- *** Turn on the printer ***

- Push and mantain pushed the button on the back of the printer (near to USB connector) for 30 seconds.

- Release the button

- With 1 to 3 minutes for DHCP Server (if you have one)

The printer now have a default configuration, if you have a DHCP server your printer now have a IP Address of your DHCP Server's IP pool.

- Print a coniguration page holding down the green button until the attention LED is blinking

- Release it, 3 pages will be printed.

It is done
Occasional Visitor
Posts: 3
Registered: ‎06-18-2006
Message 7 of 10 (31,033 Views)

Re: How to reset 1320n ip adress!?

Thanks to all.
Occasional Visitor
Posts: 1
Registered: ‎11-03-2006
Message 8 of 10 (31,033 Views)

Re: How to reset 1320n ip adress!?

Ok, but what if your printer IS NOT ON A DHCP server??

I have followed the instructions above, reprinted the config sheet and it is still 0.0.0.0, saying BOOTP/DHCP in progress...

Surely there must be a simple way of making our network see it, or vice versa!

Answers on a postcard to the usual address please :-)
Respected Contributor
Posts: 453
Registered: ‎11-30-2005
Message 9 of 10 (31,033 Views)

Re: How to reset 1320n ip adress!?

Use this free DHCP Server to asign a IP Address to your printer and then configure it as you want by Embeded Web Server (EWS):

http://tftpd32.jounin.net/

I`ve used it and works fine.
Occasional Visitor
Posts: 3
Registered: ‎10-31-2008
Message 10 of 10 (31,033 Views)

Re: How to reset 1320n ip adress!?

Thanks for the info, helped us too ;-)
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.