04-19-2002 06:12 AM
When some users print on this HP4000 PCL6 Drivers, it's writen "pcl xl error
subsystem:kernel error:unsupported protocol
04-19-2002 09:56 AM
Thanks for posting your question with us.
I have a couple of documents that will walk you through troubleshooting and resolving the PCL XL error that you are seeing. Please take a look at this information:
11-29-2011 12:13 PM
The two documents in question are :-
Good luck, regards
04-11-2012 12:17 PM
PCL XL error
So here's the issue;
I'm trying to network this printer to the computers in our computer lab. The drivers both PCL5 and PCL6 have been tried and tested STILL I get this error. What I want are the god dang drivers for a Hewlett Packard Laserjet 4050N for windows 7. I don't want your universal driver packages since these don't seem to work. Also the links on this thread don't work.
04-11-2012 03:18 PM
04-18-2012 08:23 AM
Based on your comment that you get the same error message on all drivers including PCL5 and PS, I would guess that the printer driver you think is getting used isn't actually what is being used to send output to this printer.
Which printer drivers do you have installed on your system?
Which printer driver is configured as the default for Windows?
(more in a bit... -- please let me know what you have so far)
04-18-2012 08:49 AM
In Windows7, in the "Control Panel" -> "Hardware and Sound" -> "Devices and Printers" right click on the PCL5 or postscript printer for your 4050, choose "Printer Properties" from the context menu.
On the printer properties dialog, there will be a "Print Test Page" button. Click that and let me know if it works for you to print to your 4050.
If you get the same error message for "Print Test Page", then we'll need to dig deeper. On the same "Printer Properties" dialog box, there is the "Advanced" tab where you should be able to change the driver associated with the device.
If you are not able to resolve the PCL-XL error page with these steps, please let me know.
09-09-2013 04:27 PM
I had the same problem on a HP LaserJet 4050.
I changed the settings on the I/O menu to the following
Parallel Speed = High
Parallel High Speed = Yes
Parallel Adv Function = On
Serial Pacing = Xon/Xoff
Serial Robust Xon=ON
The Serial Pacing was set to DTR/DSR - and right after I chaned that my printer began working with the HP UPD v5.5 PCL6.
Before changing that setting I needed to use PCL5.
I am hoping others can validate this - as I just stumbled upon it.
09-10-2013 11:00 PM
PCL XL Error pages gets printed if one or the other file of the driver is corrupted.
The solution to this problem is to upgrade/replace the existing driver which is in use and install a Universal Print Driver for Windows PCL6 (UPD PCL6) or a Universal Print Driver for Windows PostScript (UPD PS).
Please find the link to download the drivers mentioned above.
For UPD PCL6 :
For UPD PS :
The above two drivers should resolve your issue.
I work for HP in Printer Department.
Please send Kudos if you are satisfied with this suggestion.