HP Laserjet 8150N E10 1 error (1020 Views)
Occasional Visitor
Posts: 1
Registered: ‎11-06-2008
Message 1 of 3 (1,020 Views)

HP Laserjet 8150N E10 1 error

This printer has suddenly decided to stop working and is displaying 81.0182 E10 1 Error. Power cycling the printer has not made any difference...Appreciate any help
Honored Contributor
Posts: 614
Registered: ‎05-23-2008
Message 2 of 3 (1,020 Views)

Re: HP Laserjet 8150N E10 1 error

What ever you have in the top slot of the formatter has gone bad. Most likely the jetdirect card
Honored Contributor
Posts: 4,662
Registered: ‎04-05-2003
Message 3 of 3 (1,020 Views)

Re: HP Laserjet 8150N E10 1 error


I don't have your model, but based on what you said, look at the back of your printer.

Where the jetdirect (network card) plugs in to the printer, there will be stamped in the metal next to the slot it plugs in to, "EIO 1".

You should also have an EIO 2 slot, probably covered with a metal plate held in by screws.

Move the jetdirect to EIO 2 and see if the error changes to specify EIO 2.

If it does, then the problem is indeed with the jetdirect.

The model number of the jetdirect will be printed on the portion that sticks out of the back of the printer.

If it's a 615n, that's most likely your problem. They're known to fail. HP was replacing failed 615n cards with model 620n, but that expired on 10/31/08.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.