HP Laserjet 4000n - 79.00 FE Printer Error (2330 Views)
Reply
Occasional Visitor
Niraj Tanna
Posts: 1
Registered: ‎04-04-2003
Message 1 of 4 (2,330 Views)

HP Laserjet 4000n - 79.00 FE Printer Error

I NEED HELP! My printer suddenly decides to show an error on the control panel as soon I start it up. (79.00 FE Printer Error) I have changed printer cables, tried new drivers, tried printing from various applications, performed a cold reset, removed printer cable from computer and switched on but am still have the same problem.

Can anyone help???
Need Help!
Please use plain text.
Frequent Advisor
BR700672
Posts: 49
Registered: ‎07-29-2002
Message 2 of 4 (2,330 Views)

Re: HP Laserjet 4000n - 79.00 FE Printer Error

Please use plain text.
Frequent Advisor
CA936589
Posts: 27
Registered: ‎03-14-2003
Message 3 of 4 (2,330 Views)

Re: HP Laserjet 4000n - 79.00 FE Printer Error

Try removing the memory sim turn off printer, remove the right rear cover, then open the access panel for the memory.
Please use plain text.
Advisor
Kevin Howdershelt
Posts: 15
Registered: ‎03-23-2003
Message 4 of 4 (2,330 Views)

Re: HP Laserjet 4000n - 79.00 FE Printer Error

Does this occur at power on or when a print job is sent? If it is when you send it a job, try other software and see if the problem persists.

Other things to try:
Try removing the DIMMs. If the error goes away put 1 back in and try again. If the DIMM removal isn't the answer, remove the EIO card(s) and try. If the error still persists the problem may be the Formatter and may need replacing.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation