HP Laserjet 2100 status log shows code 50013 (1874 Views)
Reply
Occasional Visitor
Posts: 1
Registered: ‎07-12-2006
Message 1 of 3 (1,874 Views)

HP Laserjet 2100 status log shows code 50013

What can I do to troubleshoot a code 50013 that shows on the status log of a LJ 2100? I have replaced the fuser and the torsion spring and sensor arm under the registration assy. There is not much information on this probelm anywhere. Thanks.
Honored Contributor
Posts: 1,741
Registered: ‎07-25-2006
Message 2 of 3 (1,874 Views)

Re: HP Laserjet 2100 status log shows code 50013

Everett
PLJ status code 50013 is a problem with the laser assembly a beam detect error. error code 51.2
see web site
http://www.printertechs.com/tech/error-codes/error-codes-50-59.php

Mark
Advisor
Posts: 13
Registered: ‎05-18-2008
Message 3 of 3 (1,874 Views)

Re: HP Laserjet 2100 status log shows code 50013

did not make sense! 50 service code is right about the fuser assembly, but in this case, the attention flashes, press the go button and the job resumes.
log sheet, indicates 50013
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.