HP CP3525 with a 59.F0 error (1620 Views)
Occasional Visitor
Posts: 1
Registered: ‎11-29-2011
Message 1 of 1 (1,620 Views)

HP CP3525 with a 59.F0 error

The ITB is installed correctly.  I ran the sensor test to verify the primary transfer disengagement roller is fuctioning.  That tested OK.  I rotated the gear on the ITB to moved its flag.  This tested out OK.


I have reseated the ITB a couple of times.  The printer has been powered off and on numerous times.  The error still persists.  Any suggestions.  A part need to be changed?

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.