HP 8150 PCL6 with "81.0180 EIO 1 ERROR" (10281 Views)
Reply
Occasional Visitor
CA1197142
Posts: 3
Registered: ‎10-12-2004
Message 1 of 9 (10,281 Views)

HP 8150 PCL6 with "81.0180 EIO 1 ERROR"

what do we have to do for this message to disappear ?
This message appears when we have a lot of print. Some documents are correctly printed before the laserjet is blocked with "81.0180 EIO 1 ERROR" ....
Please use plain text.
Honored Contributor
Jimmy Gilmore
Posts: 1,910
Registered: ‎06-01-2004
Message 2 of 9 (10,281 Views)

Re: HP 8150 PCL6 with "81.0180 EIO 1 ERROR"

Please use plain text.
Honored Contributor
Omar Senussi
Posts: 1,352
Registered: ‎09-09-2002
Message 3 of 9 (10,281 Views)

Re: HP 8150 PCL6 with "81.0180 EIO 1 ERROR"

Have you tried switching to PCL5e?
If you can keep your head whilst all around you are losing theirs... You haven't understood the situation!
Please use plain text.
Esteemed Contributor
Mathew Siby Thomas_1
Posts: 611
Registered: ‎09-03-2004
Message 4 of 9 (10,281 Views)

Re: HP 8150 PCL6 with "81.0180 EIO 1 ERROR"

Hi Mayer,
Try the following workaround.
1. Reseat the jet direct card.
2. Swap the jet direct card to a different EIO slot.
3. Swap the Jet direct card with a known good Jet direct card and see whether the issue persist.
4. Perform a cold reset.
a.Turn printer off.
b.Hold the GO key.
c.Turn printer on.
d.Continue to hold the GO key until the printer reads Cold Reset.
e.Release GO.
f.Initializing appears.
g.Then, Restoring Factory Settings.
h.Followed by Offline.
i.Press the GO key to put back on line.

Regards
Mathew

Please use plain text.
Honored Contributor
Jay Bollyn
Posts: 3,317
Registered: ‎11-27-2002
Message 5 of 9 (10,281 Views)

Re: HP 8150 PCL6 with "81.0180 EIO 1 ERROR"

Mayer,

I would make sure the JD FW is up-to-date, which is mentioned in the link Jimmy posted. The LJ8150 printer FW can also be flash-upgraded.

I have never known PCL version to cause EIO errors.

Please let us know how it turns out.

:-) Jay
check Facebook
Please use plain text.
Occasional Visitor
CA1197142
Posts: 3
Registered: ‎10-12-2004
Message 6 of 9 (10,281 Views)

Re: HP 8150 PCL6 with "81.0180 EIO 1 ERROR"

I don't say that this printer, is on a TSE server

Do you think we can resolve this matter with a re-install of the printer ?
Please use plain text.
Honored Contributor
Jay Bollyn
Posts: 3,317
Registered: ‎11-27-2002
Message 7 of 9 (10,281 Views)

Re: HP 8150 PCL6 with "81.0180 EIO 1 ERROR"

I don't think reinstall will help.

:-) Jay
check Facebook
Please use plain text.
Occasional Visitor
CA1197142
Posts: 3
Registered: ‎10-12-2004
Message 8 of 9 (10,281 Views)

Re: HP 8150 PCL6 with "81.0180 EIO 1 ERROR"

in fine, the problem is the tcp/ip card is KO ! (the error appears all the time and the printer desappears of our net

thanks for all for your help
Please use plain text.
Occasional Visitor
jredwar
Posts: 1
Registered: ‎03-01-2012
Message 9 of 9 (7,892 Views)

Re: HP 8150 PCL6 with "81.0180 EIO 1 ERROR"

Problem could possibly be in the Formatter board itself.  Only way to check that since you have tried everything else is to replace it and see if that corrects the issue.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation