Error 79.2F83 on HP4100 (585 Views)
Reply
Occasional Visitor
CA877378
Posts: 1
Registered: ‎11-24-2002
Message 1 of 2 (585 Views)

Error 79.2F83 on HP4100

I get this error message all the time. I reset all the memory chips and still get the message. How can I fix this? The printer has 48MB RAM, 2 extra paper trays.

Robbie
Honored Contributor
Rachelle Thoren
Posts: 3,809
Registered: ‎10-14-2001
Message 2 of 2 (585 Views)

Re: Error 79.2F83 on HP4100

Robbie,

Hello.

The message 79 indicates an unexpected firmware error was encountered. Document the error message. The numeric code displayed indicates a specific error for service personnel. Error 79 can also be caused by incorrect memory addressing to a font cartridge or memory card. Remove any installed font or personality cartridges (or memory expansion cards). Turn the printer back on. If the message persists, consult service. This error can also be software related. Ensure that the error is occurring consistently before servicing the printer. A defective toner cartridge can also cause this problem (4Plus only).

Rachelle
Each day holds promise, purpose and possibility.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.