49.4200 error (2850 Views)
Reply
Occasional Visitor
Petr Finke
Posts: 1
Registered: ‎04-09-2008
Message 1 of 4 (2,850 Views)

49.4200 error

49.4200 error
Trusted Contributor
robertsk
Posts: 274
Registered: ‎03-07-2008
Message 2 of 4 (2,850 Views)

Re: 49.4200 error

Hi Petr,
First off I need to know a couple more things about your problem.
What Printer model do you have?
Is this a constant error or does it go away when you cycle power to the printer?
Occasional Visitor
bilal asasd
Posts: 1
Registered: ‎11-17-2008
Message 3 of 4 (2,850 Views)

Re: 49.4200 error

Kindly note that I have the same pronlem I'm using HP laserjet 4250n
Please help me ASAP
Honored Contributor
MJS1240!
Posts: 614
Registered: ‎05-23-2008
Message 4 of 4 (2,850 Views)

Re: 49.4200 error

This is a communication error. Make sure nothing is in the print que. Unhook the printer from the computer or network and powercycle the printer and see if it comes to ready. If does most likely a corrupt print job was sent. If that doesn't work try a cold reset. turn printer on hold check button when the memory starts to count then when the three lights light up release the button then scroll down to cold reset and hit the check mark. let it intialize. Your printer will probably need a firmware upgrade. You can download this from HP's home page under software and downloads. Make sure to read the instructions and follow them to the letter
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.