4650 "Card Slot Not Initialized" message (15480 Views)
Reply
Occasional Contributor
PNewb_1
Posts: 9
Registered: ‎03-19-2007
Message 1 of 10 (15,480 Views)

4650 "Card Slot Not Initialized" message

Is this error due to a bad Firmware or memory card? The config page lists Dimm slot 1: 128 mb DDR, CARD SLOT 1: 32 mb F/W FLASH, EIO 1: JetDirect J7934A. All other slots are empty. Thanks
Please use plain text.
Outstanding Contributor
DavidZuts
Posts: 15,035
Registered: ‎02-27-2006
Message 2 of 10 (15,480 Views)

Re: 4650 "Card Slot Not Initialized" message

You need to go through the procedure to initialize the hard drive, even though you don't have a hard drive installed...

To initialize the hard disk:

1 Turn the printer on.

2 As the printer performs its power-on sequence, press and hold the PAUSE/RESUME (HP Color LaserJet 4600 models) or MENU (HP Color LaserJet 4610n and 4650 models) button until all three lights on the control panel are lit.

3 Press the left arrow button The message INITIALIZE DISK appears on the control-panel display.

4 Press the check mark button, the printer initializes the hard disk and continues its power-on sequence.

The card slot not initialized message should now be gone.

Please use plain text.
Occasional Visitor
Michael Jura
Posts: 1
Registered: ‎09-18-2007
Message 3 of 10 (15,480 Views)

Re: 4650 "Card Slot Not Initialized" message

I do not have a left arrow button as in step 3 on my Color Laserjet 4650
Please use plain text.
Trusted Contributor
Adam F.
Posts: 338
Registered: ‎08-29-2007
Message 4 of 10 (15,480 Views)

Re: 4650 "Card Slot Not Initialized" message

The button he is referring to is a back button. The arrow is almost the same as if someone knocked over a U-turn arrow.
Please use plain text.
Occasional Visitor
BLUEROBBOMAN
Posts: 1
Registered: ‎07-16-2011
Message 5 of 10 (14,768 Views)

Re: 4650 "Card Slot Not Initialized" message

Hi David, Many thanks for that ! once again a simple fix for such an annoying message!   It's so easy when you know how :) Kind  Regards Rob Bluerobboman

Please use plain text.
Occasional Visitor
BLopez
Posts: 1
Registered: ‎09-05-2012
Message 6 of 10 (12,487 Views)

Re: 4650 "Card Slot Not Initialized" message

after following your step by step instructions, there is no "Initialize Disk" to select.

Please use plain text.
Outstanding Contributor
DavidZuts
Posts: 15,035
Registered: ‎02-27-2006
Message 7 of 10 (12,472 Views)

Re: 4650 "Card Slot Not Initialized" message

Then you have not followed the instructions correctly.

Please use plain text.
Occasional Visitor
kaniparambil
Posts: 1
Registered: ‎03-26-2013
Message 8 of 10 (11,089 Views)

Re: 4650 "Card Slot Not Initialized" message

Great help ! It worked. Thank you .

 

Thomas Kaniparambil 


DavidZuts wrote:
You need to go through the procedure to initialize the hard drive, even though you don't have a hard drive installed...

To initialize the hard disk:

1 Turn the printer on.

2 As the printer performs its power-on sequence, press and hold the PAUSE/RESUME (HP Color LaserJet 4600 models) or MENU (HP Color LaserJet 4610n and 4650 models) button until all three lights on the control panel are lit.

3 Press the left arrow button The message INITIALIZE DISK appears on the control-panel display.

4 Press the check mark button, the printer initializes the hard disk and continues its power-on sequence.

The card slot not initialized message should now be gone.


 

Please use plain text.
Advisor
Gary Singleton
Posts: 14
Registered: ‎08-13-2009
Message 9 of 10 (5,137 Views)

Re: 4650 "Card Slot Not Initialized" message

[ Edited ]

What if there is no INITIALIZE DISK when you follow those directions ?

 

This 4650dtn has no hard drive and there is no  INITIALIZE DISK option.

I pulled the Jetdirect and used the up arrow to do a Cold Reset, to no avail.

Please use plain text.
Outstanding Contributor
DavidZuts
Posts: 15,035
Registered: ‎02-27-2006
Message 10 of 10 (5,046 Views)

Re: 4650 "Card Slot Not Initialized" message

Then you are not following the instructions. Read them again and do exactly as stated. If you got the cold reset then you pressed the green button on startup and not the menu button.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation