05-05-2009 08:00 AM
I have checked the firmware and all is up to date, also have done a reset by holding down "CANCEL JOB" on start up but the error message is still their.
05-05-2009 10:17 AM
I'm attaching two pdfs from the LJ4250 User Guide.
The first pdf shows the Control Panel layout for the US - Note that in the UK "Cancel Job" is labelled "STOP" and "Pause/Resume" is labelled "Menu".
The second pdf describes what to do - using the US layout.
I think you have to power on with the "Pause/Resume" held (rather than "Cancel Job").
Let me know how you get on.
05-15-2009 06:43 AM
I've just noticed that your error is a 68.2. The service manual it talks about 68.0 as on board NVRAM and 68.1 as flash DIMM or hard drive - so I'm not sure which device 68.2 is refering to.
Related postings include :-
although this is for a different model printer and neither postings indicated successful resolution.
You can download the service manual from :-
page 363 details the 68.X error and might give you some ideas.