2600n tray 2 won't feed paper (119 Views)
Reply
Occasional Visitor
tonyw
Posts: 2
Registered: ‎03-14-2006
Message 1 of 3 (119 Views)

2600n tray 2 won't feed paper

Brand new printer, works fine with manual feed but won't take paper from tray 2. I've tried different paper weights and types but no joy.

When it tries to print I hear 4 clicks as though it's attempting to grab the paper but it always ends up reporting a jam in tray 2. There isn't a jam - the paper hasn't moved at all. It did work a couple of times at first but seems to have completely failed now.

I'm wondering if there are any obvious setup things that I'm missing or any tricks/tests to try.
Esteemed Contributor
CA1270632
Posts: 555
Registered: ‎04-15-2005
Message 2 of 3 (119 Views)

Re: 2600n tray 2 won't feed paper

Hi Tony,

Reseat all pappers as well trays.
Make sure you have set paper size and paper type as you are using in Printer as well printer driver properties.

Chandan
Keep trying...
Occasional Visitor
tonyw
Posts: 2
Registered: ‎03-14-2006
Message 3 of 3 (119 Views)

Re: 2600n tray 2 won't feed paper

Thanks for the reply Chandar. I've tried all that, and also looked around on the forums for other solutions including checking that the tray lifts the paper up correctly (it seems to, but it's a bit difficult to see for sure).

At this point I think it'll have to be returned :(

Tony
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.