HP Deskjet 9800 won't power on after a power off (494 Views)
Reply
Occasional Visitor
Richard CHANLATTE
Posts: 1
Registered: ‎01-15-2009
Message 1 of 4 (494 Views)

HP Deskjet 9800 won't power on after a power off

- The back green light is on.
- Nothing responds when i press the power button
- All the cables are correctly connected I believe.
I don't that the power supply is dead...

I have to disconnect the power cable for more than 5mns and reconnect it to see the printer works.
Please use plain text.
Esteemed Contributor
frprinterwiz
Posts: 645
Registered: ‎11-21-2008
Message 2 of 4 (494 Views)

Re: HP Deskjet 9800 won't power on after a power off

If you have another power cable, try that. Try another outlet as well. If that fails, then the logic board has probably died.
Please use plain text.
Occasional Visitor
Absalom Fesili
Posts: 1
Registered: ‎06-04-2009
Message 3 of 4 (494 Views)

Re: HP Deskjet 9800 won't power on after a power off

I have the same problem but the printer will not turn on at all but the power supply lignt is on. If the logic board is dead is there any way of fixing this problem?
Please use plain text.
Occasional Visitor
Steve Boek
Posts: 4
Registered: ‎12-21-2009
Message 4 of 4 (494 Views)

Re: HP Deskjet 9800 won't power on after a power off

I have the same problem. Did anyone figure out if it was the logic board or something else?
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation