T2300 - erro 08:11 (1574 Views)
Occasional Visitor
Posts: 1
Registered: ‎03-10-2011
Message 1 of 2 (1,574 Views)

T2300 - erro 08:11

I have a Plotter T2300. I want know that means it erro 08:11? Help me please!
Valued Contributor
Posts: 161
Registered: ‎12-03-2010
Message 2 of 2 (1,552 Views)

Re: T2300 - erro 08:11

[ Edited ]

HI...tuga! :)


Service manual indication!

System Error: 08:YZ

Problem Description : Problem with the Front Panel.

 Corrective action : Try the following:

•Switch the Power Off from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.

•Check that the Front Panel interface cable is not damaged and is correctly connected between the Main PCA and the Front Panel.

•Check that the memory module in the Formatter is installed correctly.

•Check that the connections between the Formatter and the Main PCA are not damaged and are correctly connected.

•Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. •If the System Error continues, replace the Main PCA.

•If the System Error continues, replace the Formatter. •If the System Error continues, replace the Front Panel. top


Procura no forum acho que há ai uma avaria semelhante á tua.

HP APS - Accredited Platform Specialist
If my post was useful, clik on my KUDOS! "White Star"...
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.