Q1292-60064 Paper Cutter (771 Views)
Reply
Occasional Visitor
Mike Allan2
Posts: 4
Registered: ‎03-06-2009
Message 1 of 5 (771 Views)

Q1292-60064 Paper Cutter

Can anyone direct me to a clear detailed illustration as to how to install the Q1292-60064 paper cutter. The picture in the manual is not clear. When I start the printer the cutter goes up on the right causing the printer to fault.
Please use plain text.
Occasional Visitor
Mike Allan2
Posts: 4
Registered: ‎03-06-2009
Message 2 of 5 (771 Views)

Re: Q1292-60064 Paper Cutter

I also need to know how this thing works after it is installed.
Thanks.
Please use plain text.
Honored Contributor
Carl Hennig
Posts: 904
Registered: ‎06-11-2006
Message 3 of 5 (771 Views)

Re: Q1292-60064 Paper Cutter

Assumimg you have a DJ130 or other 100 series printer, the attached photo is the best I can come up with.


Carl
Please use plain text.
Honored Contributor
Carl Hennig
Posts: 904
Registered: ‎06-11-2006
Message 4 of 5 (771 Views)

Re: Q1292-60064 Paper Cutter

You specified the cutter model, but now specify your printer.
The cutter on a DJ130 is an automatic device under the control of the printer software.
If you specify Roll as the source and the cutter is not disabled, the print head carriage grasps the cutter at the end of its travel. Drags the cutter across the page to cut the sheet. Then returns the cutter to its rest position at the far left.

There are no manual user actions.
Please use plain text.
Occasional Visitor
Mike Allan2
Posts: 4
Registered: ‎03-06-2009
Message 5 of 5 (771 Views)

Re: Q1292-60064 Paper Cutter

Thanks Carl:
I have the Designjet 130 printer. That is the cutter I was sent by HP who provided the Part Number for the whole unit. I will try to install it as per your picture.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation