HP designjet 4000 error Code 24:10 (2305 Views)
Reply
Occasional Contributor
Abdulgeder
Posts: 5
Registered: ‎01-14-2006
Message 1 of 2 (2,305 Views)

HP designjet 4000 error Code 24:10

Dear All i had this error on
HP Designjet 4000
this error is 24:10

any advice how to fix it ??

Regards
Please use plain text.
Advisor
aruyatech
Posts: 17
Registered: ‎02-19-2009
Message 2 of 2 (2,305 Views)

Re: HP designjet 4000 error Code 24:10

turn the plotter of with the front panel button. Then hold down the down button
and cancel button while powering up. Hold the buttons until you hear a beep.
This should put you in the service tests. Scroll to "Others" and press enter. scroll
to 10.1 Bag Broken Recovery and press enter. This will tell you if it is seeing a
faulty cartridge (0=yellow, 1=magenta, 2=black, 3=cyan).
Lookers are common but seers are rear
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation