HP Designjet Z6100 reads 50.2:10 (226 Views)
Reply
Visitor
drchrdsn
Posts: 3
Registered: ‎02-11-2014
Message 1 of 4 (226 Views)

HP Designjet Z6100 reads 50.2:10

I have a HP Designjet Z6100 reads 50.2:10, I cannot access the web page to try and perform a firmware upgrade. How can I upload the firmware manually with no web access?

Frequent Advisor
Roy Kuzmich
Posts: 68
Registered: ‎02-28-2011
Message 2 of 4 (190 Views)

Re: HP Designjet Z6100 reads 50.2:10

download the FW to the root of a USB stick and try through the usb port at back.

If this does not work, there is a way to send it via FTP to the printer.

You will have to contact HP for the instructions and a FW file to send.

 

The error code 50.2:10 refers to the OMAS sensor controller board.

Have you tried to replace this to see if that helps.

 

Cheers,

Roy

Good Luck

Visitor
drchrdsn
Posts: 3
Registered: ‎02-11-2014
Message 3 of 4 (180 Views)

Re: HP Designjet Z6100 reads 50.2:10

Thank Roy, we are trying the FW upgrade via USB now.

 

Doug

Visitor
drchrdsn
Posts: 3
Registered: ‎02-11-2014
Message 4 of 4 (177 Views)

Re: HP Designjet Z6100 reads 50.2:10

Thanks Roy,

 

Looks like after running some more tests, we get a 07:10 error. We tried removing and reconnecting all connections to all boards with no luck.

 

System Error:

07:10

Problem Description:

Aerosol Fan driver burnt.

Corrective Action:

Try the following:

• Replace the Interconnect PCA ⇒ Page 357.

• If the System Error continues, replace the Sausalito PCI PCA ⇒ Page 369.

 

Thanks,

 

Doug

 

Calling HP to come a repair as I don't have either board on hand.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.