HP DesignJet 90: Prints from the tray on A4, but ejecting A3 (114 Views)
Reply
Occasional Visitor
Oomps
Posts: 1
Registered: ‎02-16-2014
Message 1 of 2 (114 Views)

HP DesignJet 90: Prints from the tray on A4, but ejecting A3

Furthermore, it's impossible to perform the calibration procedure of paper feeding. After the pattern is printed, the printer pulls paper from the bypass tray, the carriage passes to the left and to the right, and the printer ejects the sheet. During printing, this only happens with A3, A4 at the same printed normally.

HP Pro
Askme
Posts: 691
Registered: ‎09-18-2011
Message 2 of 2 (92 Views)

Re: HP DesignJet 90: Prints from the tray on A4, but ejecting A3

I understand that the printer is unable to load A3 size media from both the cassette tray and manual feed option.  This could generally happen due to skew noticed by printer during media load procedure.

Please mark the post that solves your problem as Accepted Solution
Click the Kudos star if this was helpful. Thank You!

(Although I am an HP employee, I am speaking for myself and not for HP)
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.