Designjet T1100 error code 02.1:10 (10310 Views)
Reply
Occasional Visitor
Posts: 2
Registered: ‎06-16-2009
Message 1 of 5 (10,310 Views)

Designjet T1100 error code 02.1:10

As I turn on the plotter, after initializing is completed, the plotter shows the error code : 02.1:10 and ask to restart printer.
I kept getting the same error after restarting.

Please help.

Thank you,
JW
Trusted Contributor
Posts: 240
Registered: ‎05-31-2009
Message 2 of 5 (10,310 Views)

Re: Designjet T1100 error code 02.1:10

Hello Jul,
System Error: 02.1:YZ is in your service manual page 2-7

Problem
Description:
Encoder seems to be wrong.
Corrective Action: Try the following:
ô Switch the Power OFF from the back of the Printer and disconnect the
Power cord. Reconnect the power cord and power On the Printer.
ô Check that the Trailing Cable is not damaged.
ô Check that the Trailing Cable is correctly connected between the Main PCA and Carriage PCA
ô If the System Error continues, replace the Trailing Cable. â Page 8-88.
ô If the System Error continues, replace the Carriage PCA â Page 8-125.
ô If the System Error continues, replace the Main PCA. â Page 8-141.

Bill
.
.
.
Always print an extra copy, just in case you might need it.
Let's keep the trees growing and the flowers blooming.
Occasional Visitor
Posts: 2
Registered: ‎06-16-2009
Message 3 of 5 (10,310 Views)

Re: Designjet T1100 error code 02.1:10

Thank you very much, Bill.
But how can I get the Service Manual ?
Occasional Visitor
Posts: 3
Registered: ‎01-31-2011
Message 4 of 5 (9,863 Views)

Re: Designjet T1100 error code 02.1:10

i dont have service manual

Occasional Visitor
Posts: 3
Registered: ‎01-31-2011
Message 5 of 5 (9,862 Views)

Re: Designjet T1100 error code 02.1:10

how can i get the service manual?
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.