Designjet T1100 error code 02.1:10 (8071 Views)
Reply
Occasional Visitor
Jul_1
Posts: 2
Registered: ‎06-16-2009
Message 1 of 5 (8,071 Views)

Designjet T1100 error code 02.1:10

As I turn on the plotter, after initializing is completed, the plotter shows the error code : 02.1:10 and ask to restart printer.
I kept getting the same error after restarting.

Please help.

Thank you,
JW
Trusted Contributor
Bill Zhong
Posts: 240
Registered: ‎05-31-2009
Message 2 of 5 (8,071 Views)

Re: Designjet T1100 error code 02.1:10

Hello Jul,
System Error: 02.1:YZ is in your service manual page 2-7

Problem
Description:
Encoder seems to be wrong.
Corrective Action: Try the following:
ô Switch the Power OFF from the back of the Printer and disconnect the
Power cord. Reconnect the power cord and power On the Printer.
ô Check that the Trailing Cable is not damaged.
ô Check that the Trailing Cable is correctly connected between the Main PCA and Carriage PCA
ô If the System Error continues, replace the Trailing Cable. â Page 8-88.
ô If the System Error continues, replace the Carriage PCA â Page 8-125.
ô If the System Error continues, replace the Main PCA. â Page 8-141.

Bill
.
.
.
Always print an extra copy, just in case you might need it.
Let's keep the trees growing and the flowers blooming.
Occasional Visitor
Jul_1
Posts: 2
Registered: ‎06-16-2009
Message 3 of 5 (8,071 Views)

Re: Designjet T1100 error code 02.1:10

Thank you very much, Bill.
But how can I get the Service Manual ?
Occasional Visitor
hitendra
Posts: 3
Registered: ‎01-31-2011
Message 4 of 5 (7,624 Views)

Re: Designjet T1100 error code 02.1:10

i dont have service manual

Occasional Visitor
hitendra
Posts: 3
Registered: ‎01-31-2011
Message 5 of 5 (7,623 Views)

Re: Designjet T1100 error code 02.1:10

how can i get the service manual?
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.