Designjet 500 Belt Replacement (4687 Views)
Reply
Occasional Visitor
Posts: 3
Registered: ‎01-28-2007
Message 1 of 24 (4,687 Views)
Accepted Solution

Designjet 500 Belt Replacement

Could someone PLEASE email me instructions for replacing the belt on a designjet 500?

timlaguaite@peoplepc.com

Thanks,
tim
Outstanding Contributor
Posts: 15,730
Registered: ‎02-27-2006
Message 2 of 24 (4,652 Views)

Re: Designjet 500 Belt Replacement

Instructions forwarded. Good Luck
Occasional Visitor
Posts: 3
Registered: ‎01-28-2007
Message 3 of 24 (4,652 Views)

Re: Designjet 500 Belt Replacement

David,

Thank you. Thank you. Thank you.
I've had been trying for a few days to find help but kept hitting dead links. I really appreciate your response - downloaded the manual last night in only 3.5 hours with my fancy dial up connection. Thanks again.

Tim
Occasional Advisor
Posts: 8
Registered: ‎04-18-2007
Message 4 of 24 (4,652 Views)

Re: Designjet 500 Belt Replacement

I also need this information, please, please, please
Occasional Visitor
Posts: 3
Registered: ‎01-28-2007
Message 5 of 24 (4,652 Views)

Re: Designjet 500 Belt Replacement

chazbo,

leave your email and i'll forward the manual.

tim
Occasional Advisor
Posts: 8
Registered: ‎04-18-2007
Message 6 of 24 (4,652 Views)

Re: Designjet 500 Belt Replacement

absolute@peak.org thanks chazbo
Esteemed Contributor
Posts: 433
Registered: ‎03-05-2003
Message 7 of 24 (4,652 Views)

Re: Designjet 500 Belt Replacement

Tim,


You can also use a place called dropload.com at the following url:

http://dropload.com

It's a file parking site. Takes about 30 seconds to set up an account, and it's FREE...Super easy to use...


Joe
Occasional Visitor
Posts: 1
Registered: ‎05-31-2007
Message 8 of 24 (4,652 Views)

Re: Designjet 500 Belt Replacement

Oooh me too? I think I need to replace the belt, the machine is making a terrible noise when the carriage moves across the page.

email is carrie@harborarchitects.com.

Thanks for any and all help!
Occasional Visitor
Posts: 1
Registered: ‎06-19-2007
Message 9 of 24 (4,652 Views)

Re: Designjet 500 Belt Replacement

i ALSO WOULD LIKE THE BELT REPLACMENT DOC FOR THE DESINGJET 500 SEND TO r454@MSN.COM
Occasional Visitor
Posts: 1
Registered: ‎06-21-2007
Message 10 of 24 (4,652 Views)

Re: Designjet 500 Belt Replacement

I too need them, seems that the CD does not come with it. email bill.connelly@columbus.af.mil thanks

We the few who have done so much, with so little, for so long are now expected to do everything, with nothing, forever.
Outstanding Contributor
Posts: 15,730
Registered: ‎02-27-2006
Message 11 of 24 (4,497 Views)

Re: Designjet 500 Belt Replacement

Occasional Visitor
Posts: 1
Registered: ‎11-11-2008
Message 12 of 24 (4,497 Views)

Re: Designjet 500 Belt Replacement

Could someone PLEASE email me instructions for replacing the belt on a designjet 500?

Thanks
Cartrell Brown
Esteemed Contributor
Posts: 433
Registered: ‎03-05-2003
Message 13 of 24 (4,497 Views)

Re: Designjet 500 Belt Replacement

Go to the following link to download the service manual...it will walk you step by step on how to do the procedure...give you part numbers, pictures...etc...etc.

http://www.hylink.com/PrinterManual.html


Joe
Occasional Visitor
Posts: 1
Registered: ‎11-17-2008
Message 14 of 24 (4,497 Views)

Re: Designjet 500 Belt Replacement

I need these instructions. Could someone please send them to me?

Gary Pilgrim
Occasional Advisor
Posts: 16
Registered: ‎10-22-2008
Message 15 of 24 (4,497 Views)

Re: Designjet 500 Belt Replacement

I would like the Belt Replacement doc for the Designjet800ps 42". I will require the belt part number as well.

ThNK YOU

Occasional Visitor
Posts: 1
Registered: ‎12-16-2008
Message 16 of 24 (4,497 Views)

Re: Designjet 500 Belt Replacement

Please send me the instructions, thanks
rosaeric@coqui.net
Occasional Visitor
Posts: 1
Registered: ‎05-15-2009
Message 17 of 24 (4,497 Views)

Re: Designjet 500 Belt Replacement

Could someone PLEASE email me instructions for replacing the belt on a designjet 500?

Coolmed213@gmail.com

Thanks,
coolmed213

Esteemed Contributor
Posts: 433
Registered: ‎03-05-2003
Message 18 of 24 (4,497 Views)

Re: Designjet 500 Belt Replacement

Click on the following url:

http://www.hylink.com/PrinterManual.html

Download it...print it out...


Joe
Occasional Visitor
Posts: 1
Registered: ‎04-16-2011
Message 19 of 24 (4,282 Views)

Re: Designjet 500 Belt Replacement

the link is unavailable, I can't download the manual...

Could you send me a mail?

 

Thanks

 

skylinestudio@libero.it

 

Matteo

Occasional Visitor
Posts: 2
Registered: ‎04-13-2011
Message 20 of 24 (4,278 Views)
Occasional Visitor
Posts: 1
Registered: ‎09-25-2013
Message 21 of 24 (2,675 Views)

Re: Designjet 500 Belt Replacement

Our Printer got the same problem. We need this info. Please send me one. Here's my email alvin.aquiatan@gmail.com

Honored Contributor
Posts: 978
Registered: ‎08-11-2010
Message 22 of 24 (2,666 Views)

Re: Designjet 500 Belt Replacement

Check your email Carribean.

If you feel my reply has assisted you in repairing your printer please press the kudos star icon on the left and mark as problem solved. Thank you!

TJ
Occasional Visitor
Posts: 1
Registered: ‎02-06-2014
Message 23 of 24 (2,113 Views)

Re: Designjet 500 Belt Replacement

Could you please email the instructions to me as well? 91bottlerocket@gmail.com

Outstanding Contributor
Posts: 15,730
Registered: ‎02-27-2006
Message 24 of 24 (2,104 Views)

Re: Designjet 500 Belt Replacement

Stop already asking for emails. Just do a google search for the designjet 500 service manual and download yourself.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.