02.1:10 Error message in Hp 1100PS plotter (11080 Views)
Reply
Occasional Contributor
Posts: 5
Registered: ‎01-10-2009
Message 1 of 4 (11,080 Views)

02.1:10 Error message in Hp 1100PS plotter

an error message (02.1:10) is showing in Hp1100 ps plotter when ever plotter is initializing.

can any boy help?
Esteemed Contributor
Posts: 519
Registered: ‎11-05-2008
Message 2 of 4 (10,953 Views)

Re: 02.1:10 Error message in Hp 1100PS plotter

From SM:

02.1:YZ
Problem
Description:
Problem with the Carriage PCA.
Corrective Action: Try the following:

1 Switch the Power OFF from the back of the Printer and disconnect the Power
cord. Reconnect the power cord and power On the Printer.

2 Check that the Trailing Cable is not damaged.

3 Check that the Trailing Cable is correctly connected between the Main PCA
and Carriage PCA.

4 If the System Error continues, replace the Trailing Cable and Carriage PCA
Covers. See Trailing Cable (T1100/T1100ps/T610) on page 6-102 or
Trailing Cable (T1120/T1120ps) on page 6-109.

5 If the System Error continues, replace the Carriage PCA. See Carriage PCA
(T1100/T1100ps/T610) on page 6-173 or Carriage PCA (T1120/
T1120ps) on page 6-178.

6 If the System Error continues, replace the Main PCA. See Electronics Module
Main PCA and PSU (T1100/T1100ps/T610) on page 6-202 or Electronics
Module Main PCA and PSU (T1120/T1120ps) on page 6-205.

7 Replace the Carriage Assembly. See Carriage Assembly (T1100/T1100ps/
T610) on page 6-116 or Carriage Assembly (T1120/T1120ps) on page 6-
127.
If you think my answer helped you, please assign points to me
Occasional Visitor
Posts: 2
Registered: ‎09-02-2013
Message 3 of 4 (5,641 Views)

Re: 02.1:10 Error message in Hp 1100PS plotter

 

02.1:YZ
Problem 
Description:

 

Turn off the printer. Turn the printer back on and see if the error disappeared.
If not, replace the trailing cable.
If the error still persists, replace the print carriage.
Do this and your problem will be solved.

 

If you think my answer helped you, please assign points to me

Occasional Visitor
Posts: 1
Registered: ‎12-05-2013
Message 4 of 4 (4,759 Views)

02:1:10 Error message in Hp T770 plotter

Bom dia!

Minha HP T770 tá dando o erro 02:1:10

alguém pode me ajudar?

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.