Reset Jetdirect 200m (1037 Views)
Reply
Occasional Visitor
Posts: 2
Registered: ‎06-01-2005
Message 1 of 6 (1,037 Views)
Accepted Solution

Reset Jetdirect 200m

I have an external Jetdirect box (200M) which is connected to an HP Color Printer 1160. Does anyone know how to reset/clear the IP settings on the Jetdirect box? I am unable to communicate with it through Web JetAdmin.
Valued Contributor
Posts: 125
Registered: ‎05-13-2005
Message 2 of 6 (1,037 Views)

Re: Reset Jetdirect 200m

Hi Maryann,
The following link has instructions
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=bpj02738
hope that helps
Occasional Visitor
Posts: 2
Registered: ‎06-01-2005
Message 3 of 6 (1,037 Views)

Re: Reset Jetdirect 200m

That worked! It is greatly appreciated.
Thank you!

Maryann
Valued Contributor
Posts: 125
Registered: ‎05-13-2005
Message 4 of 6 (1,037 Views)

Re: Reset Jetdirect 200m

You are welcome Maryann. Am glad that worked!
Occasional Visitor
Posts: 1
Registered: ‎07-18-2005
Message 5 of 6 (1,037 Views)

Re: Reset Jetdirect 200m

I had the same problem, with a J6039B 200M on a LaserJet 1300 and tried this, but I had to hold the button in for over 20 seconds, while the print server flashed on and off in several different patterns, and eventually lit continuously. After that, the IP address was set to 192.xx.xx.xxx, and everything was peachy.
Occasional Visitor
Posts: 2
Registered: ‎12-18-2006
Message 6 of 6 (1,037 Views)

Re: Reset Jetdirect 200m

Please provide me with more details. I need to rest the lio 200m too.

Hold the "print test" button in on the liop device itself?

its connected to a cp1700.

Thanks

Joe
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.