Superdome boot problem (34 Views)
Reply
Occasional Contributor
Thanos Demetropoulos_1
Posts: 7
Registered: ‎11-28-2002
Message 1 of 3 (34 Views)

Superdome boot problem

I have A5201/2A 2-cabinet Superdome with 12cells=48CPUs, disk array attached with 4 fibers. Cannot come to a BCH mode when give >co to gsp mode. I see many errors in VFP. I enclose SL error logs from several reboots in attachment. Please help I do not know from where to start searching and replacing!
Regards
Thanos Demetropoulos, TAHOE co., Athens, Greece
Please use plain text.
HP Pro
melvyn burnard
Posts: 6,068
Registered: ‎04-06-1997
Message 2 of 3 (34 Views)

Re: Superdome boot problem

You appear to have a serious hardware failure, with what seems to be an internal communications issue between cells or I/O chassis.
Get a call logged with you local HP Response Centre
My house is the bank's, my money the wife's, But my opinions belong to me, not HP!
Please use plain text.
Honored Contributor
Sameer_Nirmal
Posts: 2,108
Registered: ‎02-21-2004
Message 3 of 3 (34 Views)

Re: Superdome boot problem

I guess the problem could be with Cell board 5 having issue related to crossbar chip. I guess this crossbar chip connectes to the crossbar fabric at the backend. If there is problem with this chip, it may collapse the backend crossbar fabric.

However, you need to place h/w call with HP Support to get rid of the problem.
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation