Re: Problems trying to calculate the power needed for EVA8400 (1241 Views)
Reply
Frequent Advisor
ReynierPM
Posts: 66
Registered: ‎04-03-2010
Message 1 of 3 (1,241 Views)
Accepted Solution

Problems trying to calculate the power needed for EVA8400

Hi every:
I'm need to calculate the amount of power needed by a EVA8400 with 2C27D configuration and all bays full with 450 GB FC 15k disks. I'm using Power Calculator from HP but this only allow 2C25D. What I'm doing wrong? See the attachment for more info about the problem
Honored Contributor
Uwe Zessin
Posts: 10,320
Registered: ‎02-16-2004
Message 2 of 3 (1,241 Views)

Re: Problems trying to calculate the power needed for EVA8400

Maybe there is a bug in the calculator. Would it help if you calculate a 2C23D and a 2C25D, then add the difference between both to the 2C25D?
.
Frequent Advisor
ReynierPM
Posts: 66
Registered: ‎04-03-2010
Message 3 of 3 (1,241 Views)

Re: Problems trying to calculate the power needed for EVA8400

Hi again:
I'm trying to calculate the total BTU/h for a full capacity EVA8400 with 600GB FC 15k disks using EVA8400 calculator from HP (Excel Tool) REV111601 but when I configure the EVA at full capacity I get a error. I try also hP eConfigurator tool but also get a lot of errors. Can any help me with this calculation? What about calculate this BTU/h for 16 full capacity EVA8400 with the same characteristics?

Cheers and thx in advance
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.