How to get information on the attached storage in hp-ux (88 Views)
Reply
Occasional Visitor
Mohammed Abdul Azeem
Posts: 2
Registered: ‎04-12-2008
Message 1 of 3 (88 Views)

How to get information on the attached storage in hp-ux

Hi,

I have a storage that is attached to my hp-ux server. I could see the following line in my ioscan output.

ctl 6 0/4/1/0.15.0 sctl CLAIMED DEVICE COMPAQ PROLIANT 4L7E*DB

My question is, how can i know more details on my connected storage like:

1. Name of the storage.
2. Product specifications ( how many disks can be accomodated in that)
3. Any commands to check the same from the operating system.

Since iam managing this server, i cannot physically check the same. Please provide me answers for the above queries.

Thanks in Advance,
Abdul.
Please use plain text.
Honored Contributor
Rob Leadbeater
Posts: 3,582
Registered: ‎08-14-2002
Message 2 of 3 (88 Views)

Re: How to get information on the attached storage in hp-ux

Hi Abdul,

I'm not familiar with HP-UX, but that identification string would appear to be that of an MSA30 disk shelf.

The DB at the end probably indicates a Dual Bus model.

http://h18000.www1.hp.com/products/quickspecs/11738_div/11738_div.html

They can hold 14 disks.

Hope this helps,

Regards,

Rob
Please use plain text.
Occasional Visitor
Mohammed Abdul Azeem
Posts: 2
Registered: ‎04-12-2008
Message 3 of 3 (88 Views)

Re: How to get information on the attached storage in hp-ux

Hi Rob,

Thanks for your inputs.

Regards,
Abdul
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation