EVA 3000 VCS3110 upgrade to VCS4.100 (743 Views)
Reply
Regular Advisor
Sharjeel Saleem
Posts: 153
Registered: ‎06-25-2006
Message 1 of 1 (743 Views)

EVA 3000 VCS3110 upgrade to VCS4.100

Hi, We are planning to upgrade our EVA controllers HSV100 from VCS 3110 (active/passive) to VCS4.100 (active/active). we gathered following information from different sources. Now i need to know the impact of this firmware upgrade at our host servers after upgrading the multipathing softwares, as the host servers consist of HP-UX v2, Windows 2000/2003 and Sun Solaris OS platforms. 

 

 

-          We can upgrade VCS 3.110 to VCS 4.100 directly. (By Offline method because online firmware upgrade supported only from VCS 4.001).

 

-          VCS 4.xxx will also require a cabling change for the Host ports on the EVA controllers. This may affect the zoning on san switches.

 

-          Downgrading while retaining existing data from VCS 4.100 to any earlier version of VCS 3.xxx firmware is not supported. Downgrade is only possible on an uninitialized storage system (which means all your data gone. Make sure you backup your EVA data first).

 

-          You may also need to upgrade firmware on disk drives when you upgraded the EVA firmware.

 

-          Be aware that switching to Active/Active firmware will require changing the multipath software on the servers as well.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation