Re: Boot from SAN 11.31 (226 Views)
Reply
Regular Advisor
Francis Flan
Posts: 153
Registered: ‎09-30-2007
Message 1 of 2 (226 Views)
Accepted Solution

Boot from SAN 11.31


HPUX 11 v.3
BL860c with no internal disks
EVA 4000

The HBA firmware is uptodate and all H/W should support BFS.
The trouble is since i have no internal disks I dont have a boot disk to copy or ignite.

I think i first need to create a LUN and present to the host. When EFI is loading the HPUX boot image will it see this LUN?
Please use plain text.
Exalted Contributor
Steven E. Protter
Posts: 33,806
Registered: ‎08-15-2002
Message 2 of 2 (226 Views)

Re: Boot from SAN 11.31

Shalom,

EFI has a menu system that should permit you to set up a network boot. Of course a boot disk needs to be prepared on the SAN disk, and you need to boot of OS media to prepare it.

However, this method of running a system is not recommended. There should be a "local" disk made available to the blade and the OS should be installed there.

That way if the SAN goes down you have an OS with which to do diagnostics.

SEP
Steven E Protter
Owner of ISN Corporation
http://isnamerica.com
http://hpuxconsulting.com
Sponsor: http://hpux.ws
Twitter: http://twitter.com/hpuxlinux
Founder http://newdatacloud.com
Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation