05-21-2012 09:57 AM
Even though My UNIX administrator started rstat daemon, I am still getting the below error.
Monitor name: UNIX Resources. Cannot initialize the monitoring on 172.30.8.170. Error while creating the RPC client. Ensure that the machine can be connected and that it runs the rstat daemon (use rpcinfo utility for this verification). Detailed error: RPC: Failed to create RPC client.
RPC-TCP: Failed to establish RPC server address.
Earlier I did the load testing on QA Environment at that time when my UNIX administrator started rstat daemon for the UNIX, it worked.
But now the environment is the Performance cluster. So when I am trying to add the UNIX resources as monitor, I am getting the above Issue.
My UNIX administrator performed all the steps explained in the Controller reference guide (Chapter 25)
Does anybody encounter the same problem?
Please advise me!
Solved! Go to Solution.
05-28-2012 02:15 AM
There could be a problem with your firewall settings on the controller machine that prohibits you from monitoring the UNIX machine. Take a look at that and see if your firewall is blocking the communication.
05-28-2012 05:32 AM
You can also check this article for reference:
If you are customer you can try posting on our internal forums for more personalized support.
If you find that this or any post resolves your issue, please be sure to mark it as an accepted solution.