Re: OPCTRAPI (102 Views)
Reply
Advisor
Christian Fandel
Posts: 24
Registered: ‎07-31-2000
Message 1 of 3 (102 Views)

OPCTRAPI

Does anyone know how to tame opctrapi ? opctrapi consumes about 20% to 40% of my resources and pushs the load up to 5
per aspera ad astra
Honored Contributor
Alex Glennie
Posts: 4,068
Registered: ‎05-07-2000
Message 2 of 3 (102 Views)

Re: OPCTRAPI

Found the following maybe relevant / worth checking ?

Why does the opctrapi process consume high amounts
of CPU when an SNMP trap is sent to OpC, with the
following pattern matching combination in the
/usr/OV/conf/OpC/sysman/trapi file:

<*.text>


The problem seems to be in the pattern matching when the operators
<*> and are used in a certain combination.

We recommend that you use the following workaround:

Substitute the <*> operator with the <@> operator
when single words should be matched and a
operator follow or proceeds the <*> operator.

Note: The <@> operator is used for matching words
(matches any string) that matches no separator.

For example, change the following:

"<*.ct><*.aid><*.node><*.job><*.ord><*.sev> Not
Noticed<*.date><25S><*.msg>"

to

"<@.ct><@.aid><@.node><@.job><@.ord><@.sev> Not
Noticed<@.date><25S><*.msg>"

The last part of the pattern "<25S><*.msg>" is necessary
to match till the end of the message. That should remain unchanged.



Email : alex_glennie@hotmail.com
Advisor
Christian Fandel
Posts: 24
Registered: ‎07-31-2000
Message 3 of 3 (102 Views)

Re: OPCTRAPI

Thank u Alex,
but the /usr/OV/conf/OpC/sysman/trapi doesn't exist on my system (ux11.0; vp with the latest con patch. I found trapi in /var/opt/OV/conf/OpC only
per aspera ad astra
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.