Problem command trendcopy (160 Views)
Reply
Occasional Contributor
Okik_Setianto
Posts: 6
Registered: ‎02-20-2013
Message 1 of 3 (160 Views)

Problem command trendcopy

[ Edited ]

Hi Everyone,

 

I've command  /ovpi/bin/trendcopy -t RT_MIEP_AGENT:RT_MIEP_AGENT -s cnpmp1 -S cnpmc1 [rc=151]

ussually this command running smoothly, but I view log following there.

 

Module Errors for [trend_proc_launch]

============================================

--------------------------------------------------------------------------------------------------

Commands failing.:-

 

 /ovpi/bin/trendcopy -t RT_MIEP_AGENT:RT_MIEP_AGENT -s cnpmp1 -S cnpmc1 [rc=151]                    [       1]

 /ovpi/bin/trendcopy -t RT_MIEP_APN:RT_MIEP_APN -s cnpmp1 -S cnpmc1 [rc=151]                        [       1]

 /ovpi/bin/trendcopy -t RT_MIEP_HOST:RT_MIEP_HOST -s cnpmp1 -S cnpmc1 [rc=151]                      [       1]

 /ovpi/bin/trendcopy -t RT_MIEP_HTTP:RT_MIEP_HTTP -s cnpmp1 -S cnpmc1 [rc=151]                      [       1]

 /ovpi/bin/trendcopy -t RT_MIEP_VG:RT_MIEP_VG -s cnpmp1 -S cnpmc1 [rc=11]                           [       1]

 /ovpi/bin/trendcopy -t R_MIEP_AVAIL:R_MIEP_AVAIL -s cnpmp1 -S cnpmc1 [rc=169]                      [       1]

 /ovpi/bin/trendcopy -t R_MIEP_CS:R_MIEP_CS -s cnpmp1 -S cnpmc1 [rc=11]                             [       1]

 /ovpi/bin/trendcopy -t R_MIEP_CU:R_MIEP_CU -s cnpmp1 -S cnpmc1 [rc=169]                            [       1]

 /ovpi/bin/trendcopy -t R_MIEP_DNS_LOOK:R_MIEP_DNS_LOOK -s cnpmp1 -S cnpmc1 [rc=169]                [       1]

 /ovpi/bin/trendcopy -t R_MIEP_F5_MEM:R_MIEP_F5_MEM -s cnpmp1 -S cnpmc1 [rc=151]                    [       1]

 /ovpi/bin/trendcopy -t R_MIEP_F5_TPUT_DTA:R_MIEP_F5_TPUT_DTA -s cnpmp1 -S cnpmc1 [rc=151]          [       1]

 

Could you tell me about this problem?

 

 

 

Moved from HP Performance Anywhere: Get Started to OV Performance Management Forum

haha
Please use plain text.
Occasional Visitor
Avigail_Oron
Posts: 1
Registered: ‎03-27-2013
Message 2 of 3 (116 Views)

Re: Problem command trendcopy

Your question is related to OVPI and therefore should be posted in the OV Performance Management Forum (http://h30499.www3.hp.com/t5/OV-Performance-Management-Forum/bd-p/itrc-166).

 

HP Performance Anywhere is a different product by HP.

If you want to learn more about Performance Anywhere, you can read more about it here- http://www8.hp.com/us/en/software-solutions/monitor-web-application-performance.html

 

Regards,

Avigail

Please use plain text.
HP Expert
Nick Paine
Posts: 416
Registered: ‎12-23-2003
Message 3 of 3 (99 Views)

Re: Problem command trendcopy

Check the trend.log for the specific error that the trendcopy command is giving or run one of the commands manually in debug mode.

 

As these trendcopy commands appear to be for rate tables, I would guess that they are run regularly.  If so, are you still getting the error or did it occur just once?  If just once, then trendcopy will recover and there is unlikely to be any data loss.

Please use plain text.
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation