Re: HP OVPI 5.41 Interface utilization reports (302 Views)
Reply
Super Advisor
HanumantMadane
Posts: 323
Registered: ‎09-20-2011
Message 1 of 4 (355 Views)
Accepted Solution

HP OVPI 5.41 Interface utilization reports

Hi All,

 

I just wonder what is the unit of data that OVPI shows in Near Real TIme Interface Utilization report...

 

for example: "Avg In", "Avg Out" 

 

below is the example of data from report generated in CSV format:

 

Table Key Avg In Utilization (F) Avg Out Utilization (F) Avg Utilization (H) UtilThreshold Serial0/1/0 0.36 0.62   90 Serial0/1/0 0.41 0.43   90

 

Can anyone help me to identify

 

1)Unit of data

2)meaning of (F)

3) why is "Avg Utilization column(H)" empty.

 

Thanks a lot in advance!

 

Regards,

Hanumant D. Madane

 

 

 

Honored Contributor
m_vidyasagar
Posts: 598
Registered: ‎04-21-2011
Message 2 of 4 (336 Views)

Re: HP OVPI 5.41 Interface utilization reports

- Vidyasagar Machani -

Tell me and I forget. Teach me and I remember. Involve me and I learn. -- Benjamin Franklin
Honored Contributor
m_vidyasagar
Posts: 598
Registered: ‎04-21-2011
Message 3 of 4 (333 Views)

Re: HP OVPI 5.41 Interface utilization reports

why is "Avg Utilization column(H)" empty. >>

 

The interface is Full Duplex hence the values related to the Full Duplex are reflecting and empty value is showing for the Half Duplex Metric..

- Vidyasagar Machani -

Tell me and I forget. Teach me and I remember. Involve me and I learn. -- Benjamin Franklin
HP Expert
Nick Paine
Posts: 417
Registered: ‎12-23-2003
Message 4 of 4 (302 Views)

Re: HP OVPI 5.41 Interface utilization reports

Average utilization is a percentage of the theoretical max utililization - octets/speed*time.

"F" and "H" refer to whether the interface is full or half duplex.

The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.