Omnibook vt6200, PCMCIA USB 2.0 Card and USB-HD (96 Views)
Reply
Occasional Visitor
Blankenhorn_1
Posts: 1
Registered: ‎05-05-2004
Message 1 of 4 (96 Views)

Omnibook vt6200, PCMCIA USB 2.0 Card and USB-HD

[ Edited ]

Hey,

i have a big problem with connecting an external USB-HD to the Omnibook

1) i tried to connect the HD to the PC, the PC just freezed afer recognising the HD

2) after changin some usb drivers the drives gets activated and everything works

BUT: IF I COPY A BIG AMOUNT OF FILES THE PC WILL ALWAYS FREEZE.

plz help

 

 

P.S. this thread has been moevd from from Archived Desktops and Workstations Boards > Windows based  to Notebook PC - Omnibooks, EVO. - Hp Forum Moderator

Honored Contributor
Gary Cantwell
Posts: 2,724
Registered: ‎08-06-2002
Message 2 of 4 (96 Views)

Re: Omnibook vt6200, PCMCIA USB 2.0 Card and USB-HD

Hello,

You could also post this over in the Ominbook Category:

http://forums1.itrc.hp.com/service/forums/categoryhome.do?categoryId=410

The experts there will have some suggestions for you,

hope this helps,

Gary
Occasional Visitor
Matthew Garland
Posts: 2
Registered: ‎05-17-2004
Message 3 of 4 (96 Views)

Re: Omnibook vt6200, PCMCIA USB 2.0 Card and USB-HD

I have the same exact problem ... I just got a USB 2.0 PCMCIA card, and was excited to use it - and now this.

If I pull the PCMCIA card out, the computer will start working again.

Anyone have any ideas?
thanks, matt
Occasional Advisor
Brett Schulte
Posts: 9
Registered: ‎12-22-2003
Message 4 of 4 (96 Views)

Re: Omnibook vt6200, PCMCIA USB 2.0 Card and USB-HD

Ever resolve this? Same problem here. Is this a BIOS issue?
The opinions expressed above are the personal opinions of the authors, not of HP. By using this site, you accept the Terms of Use and Rules of Participation.