08-23-2004 08:20 AM - last edited on 03-24-2013 08:25 PM by Cathy_xu
I have an Omnibook 4150B running Windows 2000 that all of a sudden just beeps a pattern and won't boot up when it's powered on. The pattern is beep, beep-beep-beep, beep-beep-beep, beep. Has anyone experienced this problem before? If so, can you suggest a remedy?
Moved from Archived Desktops and Workstations Boards>general to Notebook PC - Omnibooks, EVO
08-27-2004 04:23 AM
You could also post this in the Omnibook Category:
The experts there will have some suggestions for you,
Hope this helps,
08-29-2004 12:56 AM
1-3-3-1 28 Autosize DRAM.
which I suppose means that there is a problem with the RAM. Another site says:
1-3-3-1 Extended memory error so I'd try to change out the RAM and just hope the bad RAM is not hardwired to the system. (just checked -it doesn't have any hardwired in.)
www.crucial.com says you need:
144 pin SODIMM
128MB â CT406347 SDRAM, PC100 CL=2 Non-parity
But you can shop around.
Instructions for replacing RAM at:
You will need adobe reader to see the above.